HP StorageWorks 8/24 HP StorageWorks Fabric OS 6.1.x administrator guide (5697 - Page 317
zoneAdd, cfgAdd, cfgCreate, cfgEnable, nsShow, zoneCreate
View all HP StorageWorks 8/24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 317 highlights
• Target B has WWN 50:05:07:61:00:49:20:b4 (connected to switch2). The following procedure shows how to control device communication with the LSAN. To control device communication with the LSAN: 1. Log in as admin and connect to switch1. 2. Enter the nsShow command to list the WWN of the host (10:00:00:00:c9:2b:c9:0c). NOTE: The nsShow output displays both the port WWN and node WWN; the port WWN must be used for LSANs. switch:admin> nsshow { Type Pid COS PortName NodeName TTL(sec) N 060f00; 2,3; 10:00:00:00:c9:2b:c9:0c; 20:00:00:00:c9:2b:c9:0c; na FC4s: FCP NodeSymb: [35] "Emulex LP9002 FV3.91A3 DV5-5.20A6 " Fabric Port Name: 20:0f:00:05:1e:37:00:44 Permanent Port Name: 10:00:00:00:c9:2b:c9:0c The Local Name Server has 1 entry } 3. Enter the zoneCreate command to create the LSAN lsan_zone_fabric75, which includes the host. switch:admin> zonecreate "lsan_zone_fabric75", "10:00:00:00:c9:2b:c9:0c" 4. Enter the zoneAdd command to Target A to the LSAN. FID75Domain5:admin> zoneadd "lsan_zone_fabric75", "50:05:07:61:00:5b:62:ed" 5. Enter the cfgAdd or cfgCreate and cfgEnable commands to add and enable the LSAN configuration. switch:admin> cfgadd "zone_cfg", "lsan_zone_fabric75" switch:admin> cfgenable "zone_cfg" You are about to enable a new zoning configuration. This action will replace the old zoning configuration with the current configuration selected. Do you want to enable 'zone_cfg' configuration (yes, y, no, n): [no] y zone config "zone_cfg" is in effect Updating flash ... 6. Log in as admin to fabric2. 7. Enter the nsShow command to list Target A (50:05:07:61:00:5b:62:ed) and Target B (50:05:07:61:00:49:20:b4). switch:admin> nsshow { Type Pid COS PortName NodeName TTL(sec) NL 0508e8; 3; 50:05:07:61:00:5b:62:ed; 50:05:07:61:00:1b:62:ed; na FC4s: FCP [IBM DNEF-309170 F90F] Fabric Port Name: 20:08:00:05:1e:34:11:e5 Permanent Port Name: 50:05:07:61:00:5b:62:ed NL 0508ef; 3; 50:05:07:61:00:49:20:b4; 50:05:07:61:00:09:20:b4; na FC4s: FCP [IBM DNEF-309170 F90F] Fabric Port Name: 20:08:00:05:1e:34:11:e5 Permanent Port Name: 50:05:07:61:00:49:20:b4 The Local Name Server has 2 entries } 8. Enter the zoneCreate command to create the LSAN lsan_zone_fabric2, which includes the host (10:00:00:00:c9:2b:6a:2c), Target A, and Target B. switch:admin> zonecreate "lsan_zone_fabric2", "10:00:00:00:c9:2b:c9:0c;50:05:07:61:00:5b:62:ed;50:05:07:61:00:49:20:b4" Fabric OS 6.1.x administrator guide 317