HP StorageWorks 8/24 HP StorageWorks Fabric OS 6.1.x administrator guide (5697 - Page 308
portCfgShow, portCfgPersistentEnable
View all HP StorageWorks 8/24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 308 highlights
4. Enter the portCfgShow command to view ports that are persistently disabled. switch:admin> portcfgshow 7/10 Area Number: 74 Speed Level: AUTO Trunk Port OFF Long Distance OFF VC Link Init OFF Locked L_Port OFF Locked G_Port OFF Disabled E_Port OFF ISL R_RDY Mode OFF RSCN Suppressed OFF Persistent Disable OFF NPIV capability ON EX Port ON Mirror Port ON FC Fastwrite ON 5. After identifying such ports, enter the portCfgPersistentEnable command to enable the port, and then the portCfgShow command to verify the port is enabled. switch:admin> portcfgpersistentenable 7/10 switch:admin> portcfgshow 7/10 Area Number: 74 Speed Level: AUTO Trunk Port OFF Long Distance OFF VC Link Init OFF Locked L_Port OFF Locked G_Port OFF Disabled E_Port OFF ISL R_RDY Mode OFF RSCN Suppressed OFF Persistent Disable OFF NPIV capability ON EX Port ON Mirror Port ON FC Fastwrite ON 308 Using the FC-FC Routing Service