HP StorageWorks 9000s NAS 4000s and 9000s Installation Guide - Page 28

Con the iLO System Information. Set the IP Address

Get HP StorageWorks 9000s - NAS PDF manuals and user guides View all HP StorageWorks 9000s manuals
Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

DRAFT 4. Configure the Alert Email settings. Select Next to continue. 5. Configure the SNMP Settings. Select Next to continue. 6. Configure the iLO System Information. Set the IP Address to DHCP and set the iLO hostname. Do not modify the administrator account name. Select Next to continue. 7. Configure the Network Interface Information for both NICs. Select Next to continue. 8. Configure the System Information. Select Next to continue. 9. Verify that your information is correct when the configuration review screen is displayed as shown in Figure 5. Template date: 09/2003 Figure 5: Rapid Startup configuration review screen 10. Click Finish to exit Rapid Startup. If a reboot is required, Rapid Startup displays a message that a reboot is occurring and the configuration information will be set. The browser will return to the status page. The refresh may take several minutes if the device was restarted. 28 NAS 4000s and 9000s Installation Guide HP Restricted

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
28
HP Restricted
NAS 4000s and 9000s Installation Guide
DRAFT
Template date: 09/2003
4.
Configure the Alert Email settings. Select
Next
to continue.
5.
Configure the SNMP Settings. Select
Next
to continue.
6.
Configure the iLO System Information. Set the IP Address to
DHCP and set the iLO hostname. Do not modify the
administrator account name. Select
Next
to continue.
7.
Configure the Network Interface Information for both NICs.
Select
Next
to continue.
8.
Configure the System Information. Select
Next
to continue.
9.
Verify that your information is correct when the configuration
review screen is displayed as shown in
Figure 5
.
Figure 5:
Rapid Startup configuration review screen
10. Click
Finish
to exit Rapid Startup. If a reboot is required,
Rapid Startup displays a message that a reboot is occurring
and the configuration information will be set.
The browser will return to the status page. The refresh may
take several minutes if the device was restarted.