HP StorageWorks 9000s NAS 4000s and 9000s Installation Guide - Page 29
Connecting to the SAN, SAN connection tool
View all HP StorageWorks 9000s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
DRAFT Note: Once the Rapid Startup Wizard has been completed the Welcome page will become the default page. The hostname in the address bar may not on the refresh. The user should manually type the new hostname in the address bar of the browser. Connecting to the SAN The NAS 4000s and 9000s are designed to connect to HP SAN storage devices. The SAN Connection Tool included in the HP Utilities tab of the Web UI provides all of the necessary steps for connecting to the various HP SANs. Note: See Quickspecs for a complete list of supported devices. Template date: 09/2003 Note: Do not connect to the SAN storage until the "SAN connection tool" section is completed. SAN connection tool The SAN Connection Tool will aid in connecting to SAN storage. Prior to running the SAN Connection Tool, check the HP website (www.hp.com) for possible updates. ■ Context-sensitive help for the SAN Connection Tool can be obtained by selecting the question mark (?) at the far right of the primary navigation bar. ■ Do not connect fiber cables until the tool indicates that the cables may be attached. ■ All software for connecting to HP SAN storage devices is included The first screen of the SAN Connection Tool includes an overview and a checklist of items that are required for successful connection to the storage. Subsequent screens include SAN storage selection and the selection of the type of fiber path desired. Lastly, the final screen provides all of the necessary steps required to successfully connect to the SAN. NAS 4000s and 9000s Installation Guide 29 HP Restricted