HP StorageWorks 9000s NAS 4000s and 9000s Installation Guide - Page 41
Re-analyze, New Server Cluster Wizard
View all HP StorageWorks 9000s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Template date: 09/2003 DRAFT 6. The next step will run a pre-configuration analysis. This procedure analyzes and verifies the hardware and software configuration and identifies potential problems. A comprehensive and easy-to-read report will be created listing any potential configuration issues before the cluster is created. 7. Select the details tab to see a list of the items analyzed and any potential issues there may be with the cluster configuration. If there are any issues fix the issues with the suggestion provided in the details tab and then select Re-analyze. Some issues that may occur are: ■ No shared disk for the Quorum disk. A shared disk must be created with a NTFS partition at least 50 MB in size. ■ Use of DHCP addresses for network connections. All Network adapters must be configured with static IP address in a cluster configuration. ■ Service for Macintosh and Service for Netware are not supported in a cluster configuration. ■ Dynamic Disks are not supported in a cluster configuration. ■ Errors will appear on a network adapter that is not configured or does not have an active link. If the network adapter is not going to be used it should be disabled. 8. Once all issues have been resolved, select Next to continue 9. In the New Server Cluster Wizard window, enter the Cluster IP address and select Next. 10. In the New Server Cluster Wizard window, enter the login information for the domain account under which the cluster service will be run. Select Next. 11. In the New Server Cluster Wizard window, review the proposed cluster configuration and select Next. NAS 4000s and 9000s Installation Guide 41 HP Restricted