HP StorageWorks MSA2312fc HP StorageWorks 2312fc and 2324fc Modular Smart Arra - Page 25

Table 3, Parameter, Value

Get HP StorageWorks MSA2312fc PDF manuals and user guides View all HP StorageWorks MSA2312fc manuals
Add to My Manuals
Save this manual to your list of manuals

Page 25 highlights

1. From your network administrator obtain an IP address, subnet mask, and gateway address for controller A and controller B. 2. Use the provided micro-DB9 serial cable to connect controller A to a serial port on a host computer. Your package contents include a micro-DB9-to-DB9 serial cable. If necessary, use a DB9-to-DB25 adapter (not included) for connecting the serial cable to a DB25 serial port on the host computer. 3. Start and configure a terminal emulator, such as HyperTerminal or VT-100, using the display settings in Table 3 and the connection settings in Table 4. .Table 3 Terminal emulator display settings Parameter Terminal emulation mode Font Value VT-100 or ANSI (for color support) Terminal Translations None Columns 80 4. In the terminal emulator, connect to controller A. Table 4 Terminal emulator connection settings Parameter Value Connector COM1 (typically) Baud rate 115,200 Data bits 8 Parity None Stop bits 1 Flow control None 5. Press Enter to display the CLI prompt (#). HP 2312fc and 2324fc Modular Smart Array user guide 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
HP 2312fc and 2324fc Modular Smart Array user guide
25
1.
From your network administrator obtain an IP address, subnet mask, and gateway address for
controller A and controller B.
2.
Use the provided micro-DB9 serial cable to connect controller A to a serial port on a host computer.
Your package contents include a micro-DB9-to-DB9 serial cable. If necessary, use a DB9-to-DB25 adapter
(not included) for connecting the serial cable to a DB25 serial port on the host computer.
3.
Start and configure a terminal emulator, such as HyperTerminal or VT-100, using the display settings in
Table 3
and the connection settings in
Table 4
.
.
4.
In the terminal emulator, connect to controller A.
5.
Press Enter to display the CLI prompt (#).
Table 3
Terminal emulator display settings
Parameter
Value
Terminal emulation mode
VT-100 or ANSI (for color support)
Font
Terminal
Translations
None
Columns
80
Table 4
Terminal emulator connection settings
Parameter
Value
Connector
COM1 (typically)
Baud rate
115,200
Data bits
8
Parity
None
Stop bits
1
Flow control
None