HP StorageWorks P2000 HP StorageWorks P2000 G3 MSA System FC/iSCSI User Guide - Page 23
Installing the enclosures, Installation checklist
View all HP StorageWorks P2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
3 Installing the enclosures Installation checklist The following table outlines the steps required to install the enclosures and initially configure the system. To ensure a successful installation, perform the tasks in the order they are presented. Table 2 Installation checklist Step Task Where to find procedure 1. Install the controller enclosure and optional See the racking instructions poster. drive enclosures in the rack, and attach ear caps. 2. Connect controller enclosure and LFF/SFF See Connecting controller and drive enclosures on drive enclosures. page 24. 3. Connect power cords. See the installation poster. 4. Test enclosure connections. See Testing enclosure connections on page 33. 5. Install required host software. See Host system requirements on page 37. 6. Connect data hosts.3 See Connecting the enclosure to data hosts on page 37. 7. Connect remote management hosts.3 See Connecting remote management hosts on page 40. 8. Obtain IP values and set management See Obtaining IP values on page 43.1 port IP properties on the controller See Connecting to the controller CLI port; with Linux enclosure. and Windows topics. 9. Perform initial configuration tasks2: • Sign in to the web-based storage management application (SMU). See "Getting Started" in the HP StorageWorks P2000 G3 MSA System SMU Reference Guide. • Initially configure and provision the system using SMU. See "Configuring the System" and "Provisioning the System" topics (SMU reference guide or online help). 1MSA Device Discovery Tool, introduced in Obtaining IP values, provides the optimal method for setting Network port IP addresses. 2SMU is introduced in Accessing SMU on page 47. See the reference guide or online help for additional information. NOTE: For optimal performance, 6Gb P2000 G3 MSA System controller enclosures should be cabled to 6Gb P2000 G3 MSA System drive enclosures when expanding storage capacity. P2000 G3 MSA System controller to drive enclosure cabling is described within this chapter. Cabling of 3Gb drive enclosures to newer 6Gb controllers is addressed for customers upgrading existing legacy systems. NOTE: For information on NEBS Level 3-compliant carrier-grade enclosures, see http://www.hp.com/products1/servers/carrier_grade/products/cgblades/enclosure. HP StorageWorks P2000 G3 MSA System FC/iSCSI User Guide 23