HP StorageWorks SN6000 HP StorageWorks 8/20q Fibre Channel Switch CIM Agent re - Page 17
Extended properties and methods, Enable both VI and LCF.
View all HP StorageWorks SN6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Port speed configuration is not affected by optical transceiver capabilities. For example, an 8 Gb/s port may be configured to 8 Gb/s even if a 4 Gb/s optical transceiver is installed. AutoSenseSpeedConfigurable Property contains a Boolean value that is TRUE if the FCPortConfig.AutoSenseSpeed property may be configured, or FALSE if the property is read-only. RequestedTypesSupported Property contains an array of one or more acceptable values for the FCPortConfig.RequestedType property. Possible values are: • 2-G: Port may act as an E or F port. • 3-GL: Port may act as an E, F, or FL port. • 5-F: Port may only act as an F port. • 6-FX: Port may act as an F or FL port. • 16000-Donor: Port may not connect, it donates its credits for use by another port. Extended properties and methods SupportedIOStreamGuardStates Property contains an array of acceptable values for the FCPortSettings.IOStreamGuard property. Possible values are: • 1-AutoSense: Port will enable IOStreamGuard if connected to an Initiator. • 2-Enable: Suppresses the reception of RSCN messages from other ports for which I/O Stream Guard is enabled. • 3-Disable: Allows free transmission and reception of RSCN messages. SupportedPerformanceTuningModes Property contains an array of acceptable values for the FCPortSettings.PerformanceTuningMode property. If the array contains fewer than two entries, the mode is not configurable. Supported values are: • 1-AutoSense • 2-None • 3-MFS: Multi-frame sequence interleaving is suppressed. • 4-VI: Enable support for VI frames. • 5-LCF: Preference routing for link control frames. • 6-VI-LCF: Enable both VI and LCF. DeviceScanConfigurable Property contains a Boolean value that is TRUE when the FCPortSettings.DeviceScan property may be edited, or FALSE if the property is read-only. Supported WBEM operations • getClass • getInstance • enumerateInstances • enumerateInstanceNames Associations • QLGC_FCPortElementCapabilities : CIM_ElementCapabilities-1-to-1 relationship to QLGC_FCPort 8/20q Fibre Channel Switch CIM Agent reference guide 17