HP StorageWorks SN6000 HP StorageWorks 8/20q Fibre Channel Switch CIM Agent re - Page 23

Limitations: • The new configuration is stored in volatile memory. It is deleted if the switch is reset before it is applied. • There is no mechanism to pre-validate a configuration before applying it. • The switch is automatically reset when a configuration is applied. CreationTimeStamp Property contains the time the configuration was retrieved from the switch. This value is updated every time the configuration is enumerated. ConfigurationInformation Property contains the actual configuration data to be retrieved or restored. It is binary data stored as a Uint8 array. ApplyConfiguration Method will apply this configuration object as the current configuration on the switch, and reset the switch. Parameters: • ValidateOnly: [required] Must be FALSE. • TypeOfConfiguration: [required] Must be 2-Running/Current Configuration. • ManagedElement: [required] Must be the ObjectPath of a QLGC_FCSwitch instance associated to the switch RegisteredProfile object. Returns: • 0: Success • 5: Invalid Parameter. One or more parameters do not conform to the parameter limitations above. • 16000: Validate Only Request Not Supported; ValidateOnly must be FALSE • 16001: ConfigurationData is invalid; Validation failure during while applying configuration. • 16002: Element Does Not Support Initial/Default Configs; TypeOfConfiguration must be 2. • 16003: Element Does Not Support Possible Configs/Config; TypeOfConfiguration must be 2. • 16005: Element Cannot Be Configured; Probably the result of an invalid ManagemedElement parameter. Request Status Codes: • CIM_ERR_ACCESS_DENIED: User does not have authorization for this command, or another user is configuring the switch; retry later. • CIM_ERR_INVALID_PARAMETER: One or more required parameters are missing. • CIM_ERR_NOT_FOUND: The ConfigurationData instance was not found. ElementName Property contains the string Switch Configuration Image. InstanceID Opaque Identifier Supported WBEM operations • getClass • getInstance • enumerateInstances • enumerateInstanceNames • createInstance • invokeMethod Associations • QLGC_FCSwitchConfigurationData : CIM_ElementSettingData-1-to-1 relationship to QLGC_FCSwitch 8/20q Fibre Channel Switch CIM Agent reference guide 23