HP StorageWorks SN6000 HP StorageWorks 8/20q Fibre Channel Switch CIM Agent re - Page 21

fabric. If FALSE, the switch will use the preferred domainID where possible, and fail over to an available domainID in the event of a domainID conflict. This property may be edited if the value of FCSwitchCapabilities.EditDomainIDLocked property is TRUE. PrincipalPriority Property contains an enumerated principal priority configuration for the switch. Valid values for this property are reported by the PrincipalPrioritiesSupported property of the corresponding FCSwitchCapabilities instance. Possible values are: • 2-Principal: (FC-SW2)Switch_Priority=1 • 3-Subordinate: (FC-SW2)Switch_Priority=255 • 4-Any: (FC-SW2)Switch_Priority=254 Supported WBEM operations • getClass • getInstance • enumerateInstances • enumerateInstanceNames • modifyInstance • setProperty Associations • QLGC_FCSwitchElementSettingData : CIM_ElementSettingData-1-to-1 relationship to QLGC_FCSwitch QLGC_RemoteServiceAccessPoint : CIM_RemoteServiceAccessPoint RemoteServiceAccessPoint is used by the access points sub-profile to expose connectivity information for services and interfaces on the switch. There may be as many as ten instances of RemoteServiceAccessPoint, depending on which services are enabled on the switch. Supported properties and methods CreationClassName Property contains the string QLGC_RemoteServiceAccessPoint. Name Property contains a fixed string based on the type of service. • _ServiceType Name Value_ • snmp SNMP Interface • snmp IPV6 SNMP Interface • telnet Telnet Interface • telnet IPV6 Telnet Interface • ssh SSH Interface • ssh IPV6 SSH Interface • Embedded GUI Web User Interface • Embedded GUI IPV6 Web User Interface • Ethernet Ethernet Port IP Address • Ethernet IPV6 Ethernet Port IP Address SystemCreationClassName Property contains the string QLGC_FCSwitch. SystemName Property contains the switch World Wide Name (WWN). 8/20q Fibre Channel Switch CIM Agent reference guide 21