HP StorageWorks SN6000 HP StorageWorks Simple SAN Connection Manager user guid - Page 38
Second step of New Switch Setup completed, The Set the Switch Default Zoning dialog
View all HP StorageWorks SN6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Figure 15 Set Switch Admin Password dialog box: new switch setup 8. In the Set Switch Admin Password dialog box, complete the following steps: a. Enter the Old Password (the factory default password for the switch is password). b. Enter a New Password (at least 8 alphanumeric characters). c. Re-enter the new password in the Verify Password box. d. To set the switch admin password, click OK. To cancel password setup, click Cancel. 9. A message box confirms successful password change completion. Click OK to close the message box. The New Switch Setup dialog box now shows a check mark next to the second step, "Set switch administrator password," (Figure 16) indicating that you have completed that task. Figure 16 Second step of New Switch Setup completed 10. A message box asks if you want to set the switch zoning. Choose one of the following options: • To continue with the next step of switch setup, click Yes. The Set the Switch Default Zoning dialog box (Figure 17) opens. Go to step 11. • To set the switch zoning later, click No. (See Setting the switch default zoning, page 52, for a procedure for changing the switch zoning.) 38 Getting started