HP StorageWorks SN6000 HP StorageWorks Simple SAN Connection Manager user guid - Page 91
New Logical Disk Parameters dialog box MSA storage
View all HP StorageWorks SN6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Figure 57 Assign Spare Drive dialog box 5. Select one or more check boxes corresponding to the Drive Names you want to use as spare drives for this storage pool, or select the Select All check box to use all drives. Then click OK. The New Logical Disk Parameters dialog box (Figure 58) opens. Figure 58 New Logical Disk Parameters dialog box (MSA storage) 6. Specify the following parameters, and then click OK: • Type-From the list, select the class of RAID you are adding as a logical disk; for example RAID 5 or RAID 0. The number of RAID types available varies depending on the number of drives included in the storage pool. • Size-Enter the capacity of the disk you are adding as a logical disk, and then select unit of capacity (GB or MB). (Size must not exceed the indicated Maximum LUN size. The maximum size changes according to the RAID type selected.) • Name-(Optional) Enter a name (maximum 32 characters) for the new logical disk. If no name is specified, Simple SAN Connection Manager uses the default name assigned by the subsystem. The New Logical Disk Server Presentation dialog box (Figure 59) opens. HP StorageWorks Simple SAN Connection Manager user guide 91