Home » HP Manuals » Storage Devices » HP StorageWorks SN6000 » Manual Viewer

HP StorageWorks SN6000 HP StorageWorks SN6000 QuickTools Switch management use - Page 73

SNMP v3 Security

View all HP StorageWorks SN6000 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 73 highlights

Table 14 SNMP Properties dialog box fields Field Description Read Community SNMP Proxy Location Authentication Trap Write Community Trap Version Read community password (up to 32 characters) that authorizes an SNMP agent to read information from the switch. This is a write-only field. The Read Community value on the switch and the SNMP management server must be the same. The default is public. Enables or disables the use of SNMP to monitor and configure switches in the fabric. Specifies the name (up to 64 characters) for the switch location. The default is . Enables or disables the reporting of SNMP authentication failures. If enabled, a notification trap is sent when incorrect community string values are used. The default value is False. Write community password (up to 32 characters) that authorizes an SNMP client to write information to the switch. This is a write-only field. The value on the switch and the SNMP management server must be the same. The default value is private. Specifies the SNMP version (1 or 2) with which to format traps. Trap 1 Enabled Enables or disables the trap. If disabled, traps are not sent to trap monitoring stations and the trap settings are not configurable. Trap Address Trap Community Trap Severity Specifies the IP address to which SNMP traps are sent. A maximum of 5 trap addresses are supported. The default address for trap 1 is 10.0.0.254. The default address for traps 2-5 is 0.0.0.0. Trap community password (up to 32 characters) that authorizes an SNMP agent to receive traps. This is a write-only field. The value on the switch and the SNMP management server must be the same. The default is public. Specifies a severity level to assign to the trap. Open the drop-down list and choose a level. The Trap 1 Enabled option on the SNMP Properties dialog box must be enabled to access this drop-down list. Trap severity levels include Unknown, Emergency, Alert, Critical, Error, Warning, Notify, Info, Debug, and Mark Trap Port Specifies the port number (between 1-65535) on which a trap is set. The default is 162. SNMP v3 Security Simple Network Management Protocol Version 3 (SNMPv3) is an interoperable standards-based protocol for network management. SNMPv3 provides secure access to devices using a combination of authenticating and encrypting packets over the network. SNMP v3 security is an additional layer of security offered with the 7.6 and newer firmware. The SNMP v3 security is available to a switch that has a secure connection (SSL must be enabled), and can only be configured on the entry switch. The security features provided in SNMPv3 are: HP StorageWorks SN6000 Fibre Channel Switch QuickTools Switch Management User Guide 73

Section	Page
Contents	3
About this guide	9
Intended audience	9
Prerequisites	9
Related documentation	9
Document conventions and symbols	10
Table 1 Document conventions	10
JDOM license	10
HP technical support	11
Subscription service	11
HP-authorized reseller	11
Helpful websites	12
Using QuickTools	13
Workstation requirements	13
Table 2 Workstation requirements	13
Opening QuickTools	13
Figure 1 Add a New Fabric dialog box	14
Figure 2 Password Change Required dialog box	14
QuickTools user interface	14
Figure 3 QuickTools interface	15
Fabric tree	15
Graphic window	15
Data windows and tabs	15
Alerts panel	16
Figure 4 Alerts panel	16
Menu bar	17
Table 3 Menu bar options	17
Popup menus	19
Shortcut keys	19
Selecting switches	19
Selecting ports	19
Setting QuickTools preferences	19
Figure 5 Preferences dialog box–QuickTools	20
Using online Help	20
Viewing the software version	20
Exiting QuickTools	21
Managing fabrics	23
Fabric services	23
Enabling SNMP configuration	23
Enabling in-band management	23
Rediscovering a fabric	23
Adding a new switch to a fabric	23
Replacing a failed switch	24
Transparent Router	24
TR Mapping Manager dialog	26
Figure 6 TR Mapping Manager dialog	26
Removing an inter-fabric route	26
Add TR Mapping dialog	27
Figure 7 Add TR Mapping dialog	27
Mapping a new inter-fabric zone	27
Remote Fabric Zoning dialog	28
Figure 8 Remote Fabric Zoning dialog	28
Transparent Routes data window	30
Figure 9 Transparent Routes data window	30
Table 4 Transparent Routes data window fields	30
Figure 10 Transparent Route dialog	31
Event Browser	31
Figure 11 Event Browser dialog box	32
Table 5 Port operational states	32
Filtering the Event Browser	33
Figure 12 Filter Events dialog box	33
Sorting the Event Browser	33
Saving the Event Browser to a file	34
Device information and nicknames	34
Devices data window	34
Figure 13 Devices data window	34
Table 6 Devices data window fields	35
Displaying detailed device information	35
Figure 14 Detailed Devices Display dialog box	35
Managing device port nicknames	35
Creating a nickname	36
Editing a nickname	36
Deleting a nickname	36
Exporting nicknames to a file	36
Importing a nicknames file	37
Zoning	37
Active Zoneset data window	37
Figure 15 Active Zoneset data window	37
Configured Zonesets data window	38
Figure 16 Configured Zoneset data window	38
Zoning concepts	38
Zones	38
Aliases	39
Zonesets	39
Zoning database	39
Viewing zoning limits and properties	39
Managing the zoning database	40
Editing the zoning database	40
Figure 17 Edit Zoning dialog box	40
Table 7 Edit Zoning dialog box tool bar	42
Table 8 Port/Device icons	42
Options for resolving zoning	43
Configuring the zoning database	43
Figure 18 Zoning Config dialog box	43
Merge Auto Save	43
Default Zone	44
Discard Inactive	44
Saving and restoring the zoning database to a file	44
Saving the zoning database to a file	44
Restoring the zoning database from a file	44
Restoring the default zoning database	44
Removing all zone and zoneset definitions	45
Managing zonesets	45
Creating a zoneset	45
Activating and deactivating a zoneset	45
Renaming a zoneset	46
Removing a zoneset	46
Managing zones	46
Creating a zone in a zoneset	46
Copying a zone to a zoneset	47
Adding zone members	47
Renaming a zone	47
Removing a zone member	48
Removing a zone from a zoneset	48
Removing a zone from all zonesets	48
Managing aliases	48
Creating an alias	48
Adding a member to an alias	49
Removing an alias from all zones	49
Merging fabrics and zoning	49
Zone merge failure	49
Zone merge failure recovery	50
Managing switches	51
Switch data window	51
Figure 19 Switch data window	51
Switch data window buttons	52
Figure 20 Switch data window buttons	52
Table 9 Switch data window fields	52
Stack Links data window	56
Figure 21 Stack Links data window	56
Table 10 Stack Links data window	56
Managing Switch Stacks	56
Security Consistency Checklist	57
Figure 22 Security Consistency Checklist dialog box	58
Managing user accounts	58
Creating user accounts	59
Figure 23 User Account Administration–Add Account dialog box	59
Removing a user account	59
Figure 24 User Account Administration–Remove Account dialog box	60
Changing a user account password	60
Figure 25 User Account Administration–Change Password dialog box	60
Modifying a user account	61
Figure 26 User Account Administration–Modify Account dialog box	61
Paging a switch	61
Setting the date/time and enabling NTP client	61
Figure 27 Date/Time dialog box	62
Resetting a switch	62
Table 11 Switch resets	63
Configuring a switch	63
Using the configuration wizard	63
Switch properties	64
Figure 28 Switch Properties dialog box	64
Domain ID and Domain ID Lock	64
Syslog	64
Symbolic name	65
Switch administrative states	65
Broadcast support	65
In-band management	65
Fabric device management interface	65
Advanced switch properties	66
Figure 29 Advanced Switch Properties dialog box	66
Timeout values	66
Managing system services	66
Figure 30 System Services dialog box	67
Network properties	68
Figure 31 Network Properties dialog boxes	68
Network IP configuration	69
IPv4 and IPv6 addressing	69
Table 12 Network Properties dialog box—IP fields	69
Network DNS configuration	71
Table 13 Network Properties dialog box—DNS fields	71
SNMP configuration	72
SNMP properties and trap configuration parameters	72
Figure 32 SNMP Properties dialog box	72
Table 14 SNMP Properties dialog box fields	72
SNMP v3 Security	73
Figure 33 SNMP v3 Manager dialog box	74
Figure 34 SNMP v3 User Editor dialog box	75
Table 15 SNMP v3 User Editor dialog box fields	75
Testing a switch	75
Figure 35 Switch Diagnostics dialog box	76
Archiving a switch	77
Restoring a switch	77
Figure 36 Restore dialog boxes—full and selective	78
Restoring the factory default configuration	79
Table 16 Factory default configuration settings	79
Installing feature license keys	80
Figure 37 Feature Licenses dialog box	80
Figure 38 Add License Key dialog box	81
Downloading a support file	81
Installing firmware	81
Figure 39 Load Firmware dialog box	82
Using Call Home	82
Figure 40 Call Home Setup dialog box	83
Table 17 Call Home Setup fields	84
Using the Call Home Profile Manager	86
Figure 41 Call Home Profile Manager dialog box	86
Using the Call Home Profile Editor	86
Figure 42 Call Home Profile Editor dialog box	87
Using the Call Home Profile Editor—Tech Support Center Profile dialog box	88
Figure 43 Call Home Profile Editor—Tech Support Center Profile dialog box	88
Table 18 Call Home Editor—Tech Support Center Profile dialog box fields	89
Applying all profiles on a switch to other switches	90
Figure 44 Call Home Profile Multiple Switch Apply dialog box	90
Using the Call Home Message Queue	91
Figure 45 Call Home Message Queue dialog box	91
Testing Call Home Profiles	91
Figure 46 Call Home Test Profile dialog box	91
Change Over	92
Figure 47 Call Home Change Over dialog box	92
Managing ports	93
Port Information data window	93
Figure 48 Port Information data window	93
Figure 49 Port Information data window buttons	93
Table 19 Port Information data window fields	94
Port Statistics data window	96
Figure 50 Port Statistics data window	96
Table 20 Port Statistics data window fields	96
Viewing and configuring ports	99
Figure 51 Port Properties dialog box	99
Table 21 Port Properties dialog box fields	99
Port symbolic name	100
Port states	100
Port operational states	101
Table 22 Port operational states	101
Port administrative states	101
Table 23 Port administrative states	101
Port types	102
Table 24 Port types	102
Port speeds	102
Table 25 Port speeds	103
Port transceiver media status	104
Table 26 Port transceiver media view	104
I/O Stream Guard	104
Device Scan	104
Auto Performance Tuning and AL Fairness	105
Figure 52 Advanced Port Properties dialog box	105
Resetting a port	105
Testing ports	105
Figure 53 Port Diagnostics dialog box	106
Glossary	107
Index	111
A	111
B	111
C	111
D	111
E	111
F	111
G	111
H	111
I	111
M	111
N	111
O	111
P	112
R	112
S	112
T	112
U	112
W	112
X	112

Match case Limit results 1 per page

HP StorageWorks SN6000 Fibre Channel Switch QuickTools Switch Management User Guide

SNMP v3 Security

Simple Network Management Protocol Version 3 (SNMPv3) is an interoperable standards-based protocol

for network management. SNMPv3 provides secure access to devices using a combination of

authenticating and encrypting packets over the network. SNMP v3 security is an additional layer of

security offered with the 7.6 and newer firmware. The SNMP v3 security is available to a switch that has a

secure connection (SSL must be enabled), and can only be configured on the entry switch. The security

features provided in SNMPv3 are:

Read Community

Read community password (up to 32 characters) that

authorizes an SNMP agent to read information from the

switch. This is a write-only field. The Read Community value

on the switch and the SNMP management server must be

the same. The default is

public

SNMP Proxy

Enables or disables the use of SNMP to monitor and

configure switches in the fabric.

Location

Specifies the name (up to 64 characters) for the switch

location. The default is

Authentication Trap

Enables or disables the reporting of SNMP authentication

failures. If enabled, a notification trap is sent when incorrect

community string values are used. The default value is

False

Write Community

Write community password (up to 32 characters) that

authorizes an SNMP client to write information to the switch.

This is a write-only field. The value on the switch and the

SNMP management server must be the same. The default

value is

private

Trap Version

Specifies the SNMP version (1 or 2) with which to format

traps.

Trap 1 Enabled

Enables or disables the trap. If disabled, traps are not sent

to trap monitoring stations and the trap settings are not

configurable.

Trap Address

Specifies the IP address to which SNMP traps are sent. A

maximum of 5 trap addresses are supported. The default

address for trap 1 is 10.0.0.254. The default address for

traps 2–5 is

0.0.0.0

Trap Community

Trap community password (up to 32 characters) that

authorizes an SNMP agent to receive traps. This is a

write-only field. The value on the switch and the SNMP

management server must be the same. The default is

public

Trap Severity

Specifies a severity level to assign to the trap. Open the

drop-down list and choose a level. The Trap 1 Enabled

option on the SNMP Properties dialog box must be enabled

to access this drop-down list. Trap severity levels include

Unknown, Emergency, Alert, Critical, Error, Warning,

Notify, Info, Debug, and Mark

Trap Port

Specifies the port number (between 1—65535) on which a

trap is set. The default is

162

Table 14

SNMP Properties dialog box fields

Field

Description