HP Surestore 80ex HP SureStore Optical Disk Jukebox User's Guide - C1100-90015 - Page 21

Connecting the Jukebox as the Only Peripheral

Page 21 highlights

Chapter 1: Setting upStheettiDngiskupDtrhieve Jukebox Figure 1-4 Setting up the Jukebox Connecting the Jukebox as the Only Peripheral Connecting the Jukebox as the Only Peripheral Connecting the Jukebox as the Only Peripheral The default IDs for the jukebox are as follows: Jukebox = 3 Drive 1 = 4 Drive 2 = 5 (if installed) 1. Ensure that the mailslot shipping bracket and the shipping screw are removed. 2. Ensure that your host computer and your jukebox are OFF. The jukebox power switch is OFF when the switch is raised (out). 3. Connect a SCSI cable between one of the SCSI ports on the jukebox with a SCSI port on your host computer (see "4" or "5" on Figure 1-1). 4. Plug a terminator into the unused SCSI port on the jukebox. Because this configuration makes the jukebox the last peripheral on the SCSI bus, the bus must be terminated on the jukebox. The jukebox ships with a terminator plugged into one of its SCSI ports for your use. Chapter 1 1- 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96

Chapter 1
1-9
Setting up the Jukebox
Connecting the Jukebox as the Only Peripheral
Chapter 1: Setting
up the Disk Drive
Setting up the
Jukebox
Connecting the Jukebox as the Only Peripheral
Figure 1-4
Connecting the Jukebox as the Only Peripheral
The default IDs for the jukebox are as follows:
Jukebox = 3
Drive 1 = 4
Drive 2 = 5 (if installed)
1.
Ensure that the mailslot shipping bracket and the shipping screw are removed.
2.
Ensure that your host computer and your jukebox are OFF.
The jukebox power switch is OFF when the switch is raised (out).
3.
Connect a SCSI cable between one of the SCSI ports on the jukebox with a SCSI
port on your host computer (see “4” or “5” on Figure 1-1).
4.
Plug a terminator into the unused SCSI port on the jukebox.
Because this configuration makes the jukebox the last peripheral on the SCSI
bus, the bus must be terminated on the jukebox. The jukebox ships with a
terminator plugged into one of its SCSI ports for your use.