HP Surestore 80ex HP SureStore Optical Disk Jukebox User's Guide - C1100-90015 - Page 48

Retrieving Information Logged by the Jukebox

Page 48 highlights

Table 3-2 NOTE Operating the Jukebox Using the Front Panel Features Retrieving Information Logged by the Jukebox You can display information about the operations of the jukebox by using the INFO * option. This information is called a log. See Table 3-2 for a list of logs. Start with READY in the display. 1. Press NEXT until INFO * appears in the display window. 2. Press ENTER. A flashing 0 displays 3. Press NEXT until the desired log number displays. 4. Press ENTER. If you select any log except 4 or 16 (the drive logs), the log information displays. If you are in logs 4 or 16, DRIVE 1 displays and you can press ENTER for Drive 1 information. If your jukebox has two optical drives, you can press NEXT (DRIVE 2 displays) and ENTER to access Drive 2 information. 5. Press ENTER to stop the INFO * display 6. Press ENTER, then NEXT to choose another log. 7. Press CANCEL to return to READY. Information Logs No. Description 1 Firmware revision of the jukebox 4 Total cartridge loads for the drive. 5 Operation hours (power on time) 9 Total moves and move attempts by the disk transport mechanism. 12 Total disk transport mechanism flips. 14 Total mailslot rotations. 16 Optical drive SCSI ID. Additional log numbers not listed in Table 3-2 provide information that is used by authorized service personnel. 3- 16 Chapter 3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96

3-16
Chapter 3
Operating the Jukebox
Using the Front Panel Features
Retrieving Information Logged by the Jukebox
You can display information about the operations of the jukebox by using the
INFO
*
option. This information is called a log. See Table 3-2 for a list of logs.
Start with
READY
in the display.
1.
Press
NEXT
until
INFO *
appears in the display window.
2.
Press
ENTER
. A flashing
0
displays
3.
Press
NEXT
until the desired log number displays.
4.
Press
ENTER
. If you select any log except 4 or 16 (the drive logs), the log
information displays. If you are in logs 4 or 16,
DRIVE 1
displays and you can
press
ENTER
for Drive 1 information. If your jukebox has two optical drives, you
can press
NEXT
(
DRIVE 2
displays) and
ENTER
to access Drive 2 information.
5.
Press
ENTER
to stop the
INFO *
display
6.
Press
ENTER
, then
NEXT
to choose another log.
7.
Press
CANCEL
to return to
READY
.
Table 3-2
Information Logs
NOTE
Additional log numbers not listed in Table 3-2 provide information that is used by
authorized service personnel.
No.
Description
1
Firmware revision of the jukebox
4
Total cartridge loads for the drive.
5
Operation hours (power on time)
9
Total moves and move attempts by the disk
transport mechanism.
12
Total disk transport mechanism flips.
14
Total mailslot rotations.
16
Optical drive SCSI ID.