HP Surestore 80ex Optical Drive and Library SCSI-2 Command Reference - Page 96
Disconnect-Reconnect H, Buffer Full, Ratio, Buffer Empty, Maximum, Burst Size, Table 2-52
View all HP Surestore 80ex manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
SCSI-2 Drive Commands Table 2-52 SCSI-2 Drive Command Set Mode Sense (Group 0) Command (1AH) Disconnect-Reconnect Page 02H Disconnect-Reconnect Page 02H Byte 7 6 5 4 3 2 1 0 0 PS Rsvd (1) (0) Page Code (02H) 1 Page Length (0EH) 2 Buffer Full Ratio 3 Buffer Empty Ratio 4-9 Reserved (0) 10 Maximum Burst Size (MSByte) 11 Maximum Burst Size (LSByte) 12-15 Reserved (0) The disconnect-reconnect page provides the initiator the means to tune the performance of the SCSI bus. PS The Parameters Savable bit of 1 indicates this parameter page is savable in non-volatile RAM. Buffer Full Ratio This field has no effect on the drive. Buffer Empty Ratio This field has no effect on the drive. Maximum Burst Size This field indicates the maximum amount of data that the target transfers during a data phase before disconnecting if the initiator has granted the disconnect privilege. This value is expressed in increments of 512 bytes (e.g. a value of one means 512 bytes, two means 1024 bytes, etc.). A value of zero indicates there is no limit on the amount of data transferred per connection. Chapter 2 2-59