HP Surestore Disk Array 12h Controller Module Installation Guide - Page 21

click on Disk Array 12H

Get HP Surestore Disk Array 12h - And FC60 PDF manuals and user guides View all HP Surestore Disk Array 12h manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

or, inside the HP firewall (HP-qualified personnel only): • http://essd.boi.hp.com • click on "Products" • click on "Disk Arrays" • click on "Disk Array 12H" • click on "AutoRAID firmware" • left click on "ARDlif_HPxx" (xx = the controller firmware revision you want to download) • save the file using "save as" to your system Once you have the ARDlif file, copy it to a tape using the following command: dd if=ARDlif of=/dev/rmt/{tapedrive} bs=2k 2. On the machine you want to download and while the operating system is running get the following information: Perform an "ioscan -fnCdisk" and "ioscan -fnCtape" to locate the arrays and the tape device and note their location. Tape device hardware address Tape device location (i.e., /dev/rmt/...): Disk array(s) bus number(s): Firmware file name needed to download (This file should be in the ARDlif file) Primary controller 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
21
or, inside the HP firewall (HP-qualified personnel only):
•
•
click on “Products”
•
click on “Disk Arrays”
•
click on “Disk Array 12H”
•
click on “AutoRAID firmware”
•
left click on “ARDlif_HPxx” (xx = the controller firmware revision you want to download)
•
save the file using “save as” to your system
Once you have the ARDlif file, copy it to a tape using the following command:
dd if=ARDlif of=/dev/rmt/{tapedrive} bs=2k
2.
On the machine you want to download and while the operating system is running get the following
information:
Perform an “ioscan -fnCdisk” and “ioscan –fnCtape” to locate the arrays and the tape device and note their
location.
Tape device hardware address
_________________________________________
Tape device location (i.e., /dev/rmt/…):
_________________________________________
Disk array(s) bus number(s):
_________________________________________
Firmware file name needed to download
(This file should be in the ARDlif file)
_________________________________________
Primary controller
_________________________________________