HP Surestore Tape Library Model 6/140 HP Tape Library Configuration Guide - Page 23
Performing, Operations, Using the STM, Tools
View all HP Surestore Tape Library Model 6/140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Performing Operations Using the STM Tools There are three basic operations in STM: 1. To select a device or devices: • In xstm, click on the device icon. • In mstm, move the cursor over the device, and press . 2. To run a tool: Tools -> -> Run 3. To view logs after the tool completes: Tools -> -> • The Information tool creates an information log that contains firmware revisions and other useful device data. After the tool has created the log, you must then display it. Tools -> Information -> Run • The Verifier tool ensures the device is accessible by the operating system. Tools -> Verify -> Run • The Exerciser tool stresses the device. Tools -> Exercise -> Run • The Diagnostic tool attempts to isolate a hardware problem to a Field Replaceable Unit (FRU). Tools -> Diagnose -> Run • The Expert tool allows the user to interactively perform operations on the device. Tools -> Expert Tool -> Run Diagnostic support tools 21