HP T5520 Administrator's Guide: Microsoft Windows CE Image for HP Compaq Thin - Page 28

HP Connection Administrator 2. On the Assign Connections tab, select the appropriate user from the User list. 3. Select the connection from the user's connection list that you want to make primary. 4. In the Primary column, click on the column value to change it. Yes means the connection is a primary connection. The first entry in the list must be primary. 5. If you want to assign a secondary connection, select the connection and change the value in the Primary column to No. The connection becomes secondary to the first primary connection directly above it in the list. 6. To arrange the order of connections, select a connection and click the up and down arrows. Secondary connections are associated with the first primary connection above them in the list. 7. Click Apply. ✎ Every secondary connection must have a primary connection listed above it. Enabling automatic connection and reconnection In the Advanced window, you can set up primary connections assigned to users to automatically connect at boot up and to reconnect if disconnected. Automatic connection requires that you configure the Connection Adminstrator to start automatically. For more information, see "Auto starting Connection Administrator". To enable automatic connection and reconnection: 1. In the HP Connection Administrator window, click Advanced. 2. On the Assign Connections tab, select the appropriate user from the User list. 3-14 www.hp.com Administrator's Guide