HP T5530 Troubleshooting Guide for HP t5135 and t5530 Thin Client - Page 25

Troubleshooting Flow Charts, Client IP. - linux

Get HP T5530 - Compaq Thin Client PDF manuals and user guides
UPC - 882780773684
View all HP T5530 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 25 highlights

If you are running in a Linux environment go to step 3. 2. If you are running in an MS RIS PXE environment press the F12 key to activate the network service boot as soon as the DHCP IP information appears on the screen. If the unit does not boot to the network the server is not configured to PXE. If you missed the F12 cue, the system will try to boot to the ATA flash that is not present. The message on the screen will read: ERROR: Non-system disk or disk error. Replace and press any key when ready. Pressing any key will restart the boot cycle. 3. If you are running in a Linux environment an error message will appear on the screen if there is no Client IP. ERROR: Non-system disk or disk error. Replace and press any key when ready. Troubleshooting Flow Charts Figure 3-1 Initial Troubleshooting, Part 1 ENWW Troubleshooting Flow Charts 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
If you are running in a Linux environment go to step 3.
2
.
If you are running in an MS RIS PXE environment press the F12 key to activate the network service
boot as soon as the DHCP IP information appears on the screen.
If the unit does not boot to the network the server is not configured to PXE.
If you missed the F12 cue, the system will try to boot to the ATA flash that is not present. The message
on the screen will read:
ERROR: Non-system disk or disk error. Replace and press any
key when ready.
Pressing any key will restart the boot cycle.
3
.
If you are running in a Linux environment an error message will appear on the screen if there is no
Client IP.
ERROR: Non-system disk or disk error. Replace and press any key when
ready.
Troubleshooting Flow Charts
Figure
3
-
1
Initial Troubleshooting, Part 1
ENWW
Troubleshooting Flow Charts
19