HP T5530 Troubleshooting Guide for HP t5135 and t5530 Thin Client - Page 52
Deploying with PXE - instructions
![]() |
UPC - 882780773684
View all HP T5530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Deploying with PXE 1. Ensure that IBR.exe and Flash.img are stored in the same directory on the server. 2. Add [full path]\IBR.exe -y [full path]\Flash.img hd0 to the PXE command file, and run it To view the IBR command line options: At the command prompt, type IBR.EXE /? and press Enter. Refer to Appendix C, "Configuring a PXE Server under Microsoft RIS" for instructions on setting up a PXE Server using Microsoft RIS. See your documentation if using a different PXE server, such as Altiris Deployment Solution. 46 Chapter 4 Restoring the Flash Image ENWW
![](/manual_guide/products/hewlettpackard-t5135-troubleshooting-guide-hp-t5135-t5530-client-95f09bc/52.png)
Deploying with PXE
1
.
Ensure that IBR.exe and Flash.img are stored in the same directory on the server.
2
.
Add
[full path]\IBR.exe -y [full path]\Flash.img hd0
to the PXE command file,
and run it
To view the IBR command line options:
At the command prompt, type
IBR.EXE /?
and press
Enter
.
Refer to Appendix C, “Configuring a PXE Server under Microsoft RIS” for instructions on setting up a PXE
Server using Microsoft RIS. See your documentation if using a different PXE server, such as Altiris
Deployment Solution.
46
Chapter
4
Restoring the Flash Image
ENWW