HP Tc2110 hp server ultra3 SCSI HBA installation guide for tc2110 (English) - Page 49
NetWare 4.12/4.2, load after311, load c:\server.312\nwpaload, search add 1 c:\server.312\cdsave
View all HP Tc2110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Chapter 5 Novell NetWare Installation 18. Create the autoexec.ncf file. Add the following lines and then save the file. load after311 load c:\server.312\nwpaload search add 1 c:\server.312\cdsave load cdrom 19. Load the following command from the console prompt: load c:\server.312\312ptd\patch312 20. Install the patches from the c:\server.312\312ptd directory. 21. Edit the driver load command in the startup.ncf file to include the slot number detected in Step Step 16 above (for example, load c:\server.312\adpt160m slot=2). 22. Install any recommended vendor specific patches. See the Novell Web site for details. 23. Down and Exit the server. 24. Run server.exe. 25. Installation of the driver for NetWare 3.12/3.2 is complete. NetWare 4.12/4.2 Follow these instructions only if you are installing NetWare 4.12/4.2 for the first time: 1. Begin installation of NetWare 4.12/4.2 on your server as instructed in your NetWare documentation. 2. When a screen appears that asks you to select a disk driver, press Insert. 3. Insert the HP Ultra3 Family Manager Set disk for NetWare into your floppy disk drive. 4. Press F3 and enter a:\netware as the path to the adpt160m.ham driver for NetWare. 5. Select adpt160m.ham and press Enter. 6. Select No not to save existing file, Yes to save existing file cdrom.nlm. 7. Select No not to save existing file, Yes to save existing file nbi.nlm. 8. Select No not to save existing file, Yes to save existing file nwpa.nlm. 43