HP Tc2110 hp server ultra3 SCSI HBA installation guide for tc2110 (English) - Page 51
Install CD-ROM Drivers on a DOS Bootable Hard Disk, mkdir c:\scsi, device=c:\scsi\aspi8u2.sys /d
View all HP Tc2110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Chapter 5 Novell NetWare Installation Install CD-ROM Drivers on a DOS Bootable Hard Disk The following systems files should be modified: · config.sys · autoexec.bat 1. Copy the files aspi8u2.sys and aspicd.sys from the DOS directory of the Ultra3 Family Manager Set disk to your C:\ drive. At the DOS prompt, type the following lines and press Enter after each line: mkdir c:\scsi copy a:\dos\*.* c:\scsi 2. Modify config.sys for loading aspi8u2.sys and aspicd.sys, which is necessary for connecting a CD-ROM. Either create this file in C:\ if you do not currently have a config.sys, or add these lines to the existing config.sys file. Note that you may need to change the path for the drivers. device=c:\scsi\aspi8u2.sys /d device=c:\scsi\aspicd.sys /d:aspicd0 3. Modify autoexec.bat for loading mscdex.exe. Either create this file in C:\ if you do not currently have autoexec.bat, or add these lines to the existing autoexec.bat file: c:\dos\mscdex.exe /d:aspicd0 /m:12 NOTE This will assign the CD-ROM to the next available drive letter, typically D:\ if there is only one DOS drive. If you are using MS-DOS 5.0 and do not already have mscdex.exe, you will need to either upgrade to MS-DOS 6.0 or above, or download mscdex.exe from Microsoft BBS or CompuServe forum. 4. Reboot your system. You are now able to access your CD-ROM drive from the command line and from Windows. 45