HP Tc2110 product update: hp server tc2110 (English) - Page 7
HP NetRAID-1M Adapter Firmware and BIOS Update Procedure
View all HP Tc2110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
1. Under Windows or Linux environment, launch \startup.htm in the Startup CD. 2. To install just the Monitor Service and Scheduler, select the option "Click here to install Windows (NT, W2K) utilities (monitor only) directly from the CD". 3. To install all the utilities (NetRAID Assistant, Monitor Service, Scheduler), select the option "Click here to install Windows (NT, W2K) utilities (NetRAID Assistant and monitor) directly from the CD". 4. Follow the on-screen instructions. Novell NetWare 5.1 and NetWare 6.0 Follow the instructions outlined in this section to install the following HP NetRAID-1M software: · HP NetRAID Config utility (megamgr.nlm) · HP NetRAID Monitor Service (megamon.nlm) 1. Under Windows or Linux environment, launch \startup.htm in the Startup CD. 2. Select the option "Click here to create a diskette containing the NetWare utilities (hp disk HP NetRAID-1M NetWare utilities)". 3. Boot the NetWare server to DOS. 4. Insert the NetRAID 1M NetWare utilities diskette into the server's floppy drive. 5. Type: Copy :\*.* :\nwserver where is the drive letter of the floppy drive you are using and is the hard disk where NetWare is installed. Press . 6. Restart the server. 7. To load the HP NetRAID Config utility, type: load :\nwserver\megamgr.nlm at the NetWare console prompt and press . 8. To load the HP NetRAID Monitor Service, type: load :\nwserver\megamon.nlm at the NetWare console prompt and press . HP NetRAID-1M Adapter Firmware and BIOS Update Procedure Follow the instructions outlined in this section to update the HP NetRAID-1M firmware and BIOS. 1. Under Windows or Linux environment, launch \startup.htm in the Startup CD. 2. Select the option "Click here to create a bootable DOS diskette containing the HP NetRAID-1M firmware image and DOS flash utility (hp disk HP NetRAID-1M firmware)". 3. Insert the HP NetRAID-1M firmware diskette into the server's floppy drive. 4. Reboot the server. 5. Follow the instructions on the screen to confirm the update. 6. Reboot the server.