HP VL600 HP Vectra VL600, 3 COM Etherlink III PCI Ethernet Adapter (3C900B-Com - Page 8
Connecting to a Novell NetWare 4.11 Server
View all HP VL600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Connecting to a Novell NetWare 4.11 Server Microsoft Windows 95 SR2.5 4 Connecting to a Novell NetWare 4.11 Server Microsoft Windows 95 Requirements SR2.5 Operating System Driver Version Driver File Server OS Client OS Windows 95 SR2.5 1.51 El90xbc5.sys NetWare 4.11 Server Novell Procedure 1 With the HP Vectra turned off, install the network adapter into a PCI slot. 2 Connect the network cable to the newly installed network adapter. 3 Power on the machine and boot to Windows 95. 4 Windows 95 will detect the network adapter as "3Com Etherlink PCI Combo NIC (3C900B-COMBO)" during start up and install the OS embedded driver. 5 Click on "YES" when Windows 95 prompts to restart the system. 6 After restarting the system, additional changes in the network properties, such as: workgroup name, computer name, etc. may be necessary. Ask your Network Administrator for more information. Restart the system if changes are made. 7 From the location of the "Novell Client v3.1 for Windows 95/98" installation files, execute "Setup.exe". 8 Click on "Yes" to accept the "Novell Terms and Conditions". 9 Select either "Typical" or "Custom" and click on "Install". Typical Installation is normally chosen. Select Custom Installation only if you are an administrator or an advanced user. When prompted for options during installation, ask your Network Administrator for more information. 10 Click on "Reboot" once the installation is complete. 6