HP Vectra VEi7 HP Vectra VEi7, Olicom OC-3137 Token Ring 16/4 PCI Adapter, Ins
HP Vectra VEi7 Manual
 |
View all HP Vectra VEi7 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Vectra VEi7 manual content summary:
- HP Vectra VEi7 | HP Vectra VEi7, Olicom OC-3137 Token Ring 16/4 PCI Adapter, Ins - Page 1
Olicom OC-3137 Token Ring 16/4 PCI Adapter Installation Guide - HP Vectra VEi7 | HP Vectra VEi7, Olicom OC-3137 Token Ring 16/4 PCI Adapter, Ins - Page 2
in connection with the furnishing, performance, or use of this material. Hewlett-Packard assumes no responsibility for the use or reliability of its software on equipment that is not furnished by Hewlett-Packard. This document contains proprietary information that is protected by copyright. All - HP Vectra VEi7 | HP Vectra VEi7, Olicom OC-3137 Token Ring 16/4 PCI Adapter, Ins - Page 3
Bios setup and set PnP OS field to NO. • How to change LAN card configuration if needed (Advanced users only) This is a general advisory on how to forcibly modify resources for ISA and PCI network cards. ISA cards: • For ISA network adapters, start the configuration tool provided in driver power up - HP Vectra VEi7 | HP Vectra VEi7, Olicom OC-3137 Token Ring 16/4 PCI Adapter, Ins - Page 4
General information to read before installing 2 Press F2 to go to CMOS setup. 3 Set PNP OS to NO and reserve IRQ 5. 4 Save settings and boot to applicable OS. - HP Vectra VEi7 | HP Vectra VEi7, Olicom OC-3137 Token Ring 16/4 PCI Adapter, Ins - Page 5
Interrupt I/O Address Vectra Vli8 09 1000 Vectra VEi7 03 DCC0 Vectra VEi8 10 E400 Procedure 1 With the HP Vectra turned off, install the Olicom 3137 Token Ring 16/4 PCI card into a PCI slot. 2 Connect network cable media to the Olicom 3137 Token Ring 16/4 PCI card. 3 Power on the machine - HP Vectra VEi7 | HP Vectra VEi7, Olicom OC-3137 Token Ring 16/4 PCI Adapter, Ins - Page 6
Interrupt I/O Address Vectra Vli8 10 1000 Vectra VEi7 03 DCC0 Vectra VEi8 11 E400 Procedure 1 With the HP Vectra turned off, install the Olicom 3137 Token Ring 16/4 PCI card into a PCI slot. 2 Connect network cable media to the Olicom 3137 Token Ring 16/4 PCI card. 3 Power on the machine - HP Vectra VEi7 | HP Vectra VEi7, Olicom OC-3137 Token Ring 16/4 PCI Adapter, Ins - Page 7
Interrupt I/O Address Vectra Vli8 10 1000 Vectra VEi7 03 DCC0 Vectra VEi8 10 E400 Procedure 1 With the HP Vectra turned off, install the Olicom 3137 Token Ring 16/4 PCI card into a PCI slot. 2 Connect network cable media to the Olicom 3137 Token Ring 16/4 PCI card. 3 Power on the machine - HP Vectra VEi7 | HP Vectra VEi7, Olicom OC-3137 Token Ring 16/4 PCI Adapter, Ins - Page 8
3 Installing the Olicom OC-3137 Token Ring 16/4 PCI Adapter Connecting to a Novell NetWare 3.12 Server 10 Click on "Yes" to accept the License Agreement. 11 Select "Custom" installation and click on "Next". 12 Select "Bindery (NetWare 3.x)" and click on "Next". 13 Click on "Install" to start the - HP Vectra VEi7 | HP Vectra VEi7, Olicom OC-3137 Token Ring 16/4 PCI Adapter, Ins - Page 9
Interrupt I/O Address Vectra Vli8 10 1000 Vectra VEi7 03 DCC0 Vectra VEi8 11 E400 Procedure 1 With the HP Vectra turned off, install the Olicom 3137 Token Ring 16/4 PCI card into a PCI slot. 2 Connect network cable media to the Olicom 3137 Token Ring 16/4 PCI card. 3 Power on the machine - HP Vectra VEi7 | HP Vectra VEi7, Olicom OC-3137 Token Ring 16/4 PCI Adapter, Ins - Page 10
4 Installing the Olicom OC-3137 Token Ring 16/4 PCI Adapter Connecting to a Novell NetWare 4.11 Server 10 Click on "Yes" to accept the License Agreement. 11 Select "Custom" installation and click on "Next". 12 Select "NDIS (NetWare 4.x or higher)" and click on "Next". 13 Click on "Install" to start - HP Vectra VEi7 | HP Vectra VEi7, Olicom OC-3137 Token Ring 16/4 PCI Adapter, Ins - Page 11
NT 4.0 Service Pack 4 media. • Microsoft Windows NT 3.51 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 09 1000 Vectra VEi7 03 DCC0 Vectra VEi8 10 - HP Vectra VEi7 | HP Vectra VEi7, Olicom OC-3137 Token Ring 16/4 PCI Adapter, Ins - Page 12
10 At the "Network Services:" prompt, accept default settings and click on "Next". 11 Finish the network card installation by clicking on "Next Service Pack 4 application to correct the error messages in the Event Viewer. 19 Install the Hewlett-Packard Soft-Power Down application once the Service - HP Vectra VEi7 | HP Vectra VEi7, Olicom OC-3137 Token Ring 16/4 PCI Adapter, Ins - Page 13
Windows NT 4.0 Service Pack 4 media. • Microsoft Windows NT 4.0 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 11 1000 Vectra VEi7 03 DCC0 Vectra VEi8 11 - HP Vectra VEi7 | HP Vectra VEi7, Olicom OC-3137 Token Ring 16/4 PCI Adapter, Ins - Page 14
Server 10 At the "Network Services:" prompt, accept default settings and click on "Next". 11 Finish the network card installation by clicking on " Service Pack 4 application to correct the error messages in the Event Viewer. 19 Install the Hewlett-Packard Soft-Power Down application once the Service - HP Vectra VEi7 | HP Vectra VEi7, Olicom OC-3137 Token Ring 16/4 PCI Adapter, Ins - Page 15
• HP Vectra with Windows NT 4.0 Workstation. • Olicom 3137 Token Ring 16/4 PCI adapter and drivers disk version 29.4.0. • Driver: OCTOK16.SYS, version 4.16 • Microsoft Windows NT 4.0 Workstation media. • Microsoft Windows NT 4.0 Service Pack 4 media. • Novell NetWare 3.12 Server system that supports - HP Vectra VEi7 | HP Vectra VEi7, Olicom OC-3137 Token Ring 16/4 PCI Adapter, Ins - Page 16
Services:" prompt, accept default settings and click on "Next". 11 Finish the network card to agree to the Software License Agreement to begin Service Pack 4 application to correct the error messages in the Event Viewer. 26 Install the Hewlett-Packard Soft Power Down application once the Service - HP Vectra VEi7 | HP Vectra VEi7, Olicom OC-3137 Token Ring 16/4 PCI Adapter, Ins - Page 17
• HP Vectra with Windows NT 4.0 Workstation. • Olicom 3137 Token Ring 16/4 PCI adapter and drivers disk version 29.4.0. • Driver: OCTOK16.SYS, version 4.16 • Microsoft Windows NT 4.0 Workstation media. • Microsoft Windows NT 4.0 Service Pack 4 media. • Novell NetWare 4.11 Server system that supports - HP Vectra VEi7 | HP Vectra VEi7, Olicom OC-3137 Token Ring 16/4 PCI Adapter, Ins - Page 18
Services:" prompt, accept default settings and click on "Next". 11 Finish the network card to agree to the Software License Agreement to begin Service Pack 4 application to correct the error messages in the Event Viewer. 27 Install the Hewlett-Packard Soft Power Down application once the Service - HP Vectra VEi7 | HP Vectra VEi7, Olicom OC-3137 Token Ring 16/4 PCI Adapter, Ins - Page 19
NT 3.51 Service Pack 5 media. • Microsoft Windows NT 3.51 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 05 1000 Vectra VEi7 03 DCC0 Vectra VEi8 10 E400 - HP Vectra VEi7 | HP Vectra VEi7, Olicom OC-3137 Token Ring 16/4 PCI Adapter, Ins - Page 20
Card Detection" dialog box. 10 From the "Drop Down List", scroll down and select " Requires disk from manufacturer", then click "Continue". 11 Set the path to "A:\" in the "Insert Disk" dialog box, and then insert the Olicom driver box. 17 Install the Windows NT3.51 Service Pack 5 application. - HP Vectra VEi7 | HP Vectra VEi7, Olicom OC-3137 Token Ring 16/4 PCI Adapter, Ins - Page 21
NT 3.51 Service Pack 5 media. • Microsoft Windows NT 4.0 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 09 1000 Vectra VEi7 03 DCC0 Vectra VEi8 10 E400 - HP Vectra VEi7 | HP Vectra VEi7, Olicom OC-3137 Token Ring 16/4 PCI Adapter, Ins - Page 22
Card Detection" dialog box. 10 From the "Drop Down List", scroll down and select " Requires disk from manufacturer", then click "Continue". 11 Set the path to "A:\" in the "Insert Disk" dialog box, and then insert the Olicom driver box. 17 Install the Windows NT3.51 Service Pack 5 application. - HP Vectra VEi7 | HP Vectra VEi7, Olicom OC-3137 Token Ring 16/4 PCI Adapter, Ins - Page 23
NT 3.51 Service Pack 5 media. • Novell NetWare 4.11 Server system that supports IPX network protocol. • Novell IntranetWare Client for Windows NT v4.11b installation media. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 09 1000 Vectra VEi7 03 DCC0 Vectra VEi8 10 - HP Vectra VEi7 | HP Vectra VEi7, Olicom OC-3137 Token Ring 16/4 PCI Adapter, Ins - Page 24
Card Detection" dialog box. 10 From the "Drop Down List", scroll down and select " Requires disk from manufacturer", then click "Continue". 11 Set the path to "A:\" in the "Insert Disk" dialog box, and then insert the Olicom driver . 20 Install the Windows NT3.51 Service Pack 5 application. - HP Vectra VEi7 | HP Vectra VEi7, Olicom OC-3137 Token Ring 16/4 PCI Adapter, Ins - Page 25
Interrupt I/O Address Vectra Vli8 09 1000 Vectra VEi7 09 DC00 Vectra VEi8 09 DC00 Procedure 1 With the HP Vectra turned off, install the Olicom 3137 16/4 Token-Ring PCI adapter into a PCI slot. 2 Connect network cable media to the Olicom 3137 16/4 Token-Ring PCI card. 3 Power on the machine - HP Vectra VEi7 | HP Vectra VEi7, Olicom OC-3137 Token Ring 16/4 PCI Adapter, Ins - Page 26
12 Installing the Olicom OC-3137 Token Ring 16/4 PCI Adapter Connecting to a Microsoft Windows NT 4.0 Server 10 At the "Network Drivers" window, click on "Close". 11 At "Network Setup" click on "OK". 12 Specify your User Name, Workgroup Name, and Computer Name and hit Enter. 13 - HP Vectra VEi7 | HP Vectra VEi7, Olicom OC-3137 Token Ring 16/4 PCI Adapter, Ins - Page 27
4.11 Server Requirements • HP Vectra with Windows for Workgroups 3.11. • Olicom 3137 Token Ring 16/4 PCI adapter and drivers disk version 29.4.0. • Driver: OCTOK16.386, version 2.32 • Microsoft Windows for Workgroups 3.11 media. • Novell NetWare 4.11 Server system that supports IPX network protocol - HP Vectra VEi7 | HP Vectra VEi7, Olicom OC-3137 Token Ring 16/4 PCI Adapter, Ins - Page 28
10 Select option 6 "Highlight here and press to install" and press "Enter" to begin installation. 11 When the installation is finished, remove the Olicom driver disk from the floppy drive and press to restart the system. 12 You may login to a server from the DOS prompt or - HP Vectra VEi7 | HP Vectra VEi7, Olicom OC-3137 Token Ring 16/4 PCI Adapter, Ins - Page 29
- HP Vectra VEi7 | HP Vectra VEi7, Olicom OC-3137 Token Ring 16/4 PCI Adapter, Ins - Page 30
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
 |
 |
Olicom OC-3137 Token Ring 16/4
PCI Adapter
Installation Guide