HP Vectra VEi7 HP Vectra VEi7, Olicom OC-3137 Token Ring 16/4 PCI Adapter, Ins - Page 11
Microsoft Windows NT, 0 Workstation, Connecting to a, Windows NT 3.51 Server, Requirements, Device
View all HP Vectra VEi7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
5 Installing the Olicom OC-3137 Token Ring 16/4 PCI Adapter Microsoft Windows NT 4.0 Workstation 5 Installing the Olicom OC-3137 Token Ring 16/4 PCI Adapter Microsoft Windows NT 4.0 Workstation Connecting to a Requirements Windows NT 3.51 Server • HP Vectra with Windows NT 4.0 Workstation. • Olicom 3137 Token Ring 16/4 PCI adapter and drivers disk version 29.4.0. • Driver: OCTOK16.SYS, version 4.16 • Microsoft Windows NT 4.0 Workstation media. • Microsoft Windows NT 4.0 Service Pack 4 media. • Microsoft Windows NT 3.51 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 09 1000 Vectra VEi7 03 DCC0 Vectra VEi8 10 E400 Procedure 1 With the HP Vectra turned off, install the Olicom Token-Ring PCI adapter into a PCI slot. 2 Connect network cable media to the Olicom Token-Ring PCI card. 3 Log into Windows NT with administrator privileges. 4 Open the "Network Properties" window and agree to install "Windows NT Networking". 5 With "Wired to the Network" checked, click on "Next". 6 Click on the option to "Select from list" then on "Have Disk". 7 Insert the Olicom Token-Ring PCI driver disk into the floppy drive. 8 Confirm choice, "Olicom 3137 Token Ring Adapter", and press the "OK" button. 9 Select the applicable network protocols and click on "Next".