HP Vectra VEi7 HP Vectra VEi7, Olicom OC-3137 Token Ring 16/4 PCI Adapter, Ins - Page 25

12 Installing the Olicom OC-3137 Token Ring 16/4 PCI Adapter Microsoft Windows for Workgroups 3.11 12 Installing the Olicom OC-3137 Token Ring 16/4 PCI Adapter Microsoft Windows for Workgroups 3.11 Connecting to a Microsoft Windows NT 4.0 Server Requirements • HP Vectra with Windows for Workgroups 3.11. • Olicom 3137 Token Ring 16/4 PCI adapter and drivers disk version 29.4.0. • Driver: OCTOK16.386, version 2.32 • Microsoft Windows for Workgroups 3.11 media. • Microsoft Windows NT 4.0 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 09 1000 Vectra VEi7 09 DC00 Vectra VEi8 09 DC00 Procedure 1 With the HP Vectra turned off, install the Olicom 3137 16/4 Token-Ring PCI adapter into a PCI slot. 2 Connect network cable media to the Olicom 3137 16/4 Token-Ring PCI card. 3 Power on the machine and run Windows. 4 After Windows loads, open the "NETWORK" folder, and double click the "NETWORK SETUP" icon. 5 Select "Networks" and click on "Install Microsoft Windows Network" then hit Enter. 6 Click on "Drivers" then on "Add Adapter". 7 Accept "Unlisted or Updated Network Adapter" and hit Enter. 8 Insert Olicom driver disk and click on OK. 9 Select "Olicom 3137 Token Ring PCI" and click on "OK".