HP Vectra VEi7 HP Vectra VEi7, Olicom OC-3137 Token Ring 16/4 PCI Adapter, Ins - Page 27
Installing the Olicom OC-3137 16/4 Token Ring PCI, Adapter
View all HP Vectra VEi7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
13 Installing the Olicom OC-3137 16/4 Token Ring PCI Adapter Microsoft Windows for Workgroups 3.11 13 Installing the Olicom OC-3137 16/4 Token Ring PCI Adapter Microsoft Windows for Workgroups 3.11 Connecting to a Novell NetWare 4.11 Server Requirements • HP Vectra with Windows for Workgroups 3.11. • Olicom 3137 Token Ring 16/4 PCI adapter and drivers disk version 29.4.0. • Driver: OCTOK16.386, version 2.32 • Microsoft Windows for Workgroups 3.11 media. • Novell NetWare 4.11 Server system that supports IPX network protocol. • NetWare Client for DOS and MS Windows v1.21 installation media. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 11 1000 Vectra VEi7 09 DC00 Vectra VEi8 10 E400 Procedure 1 With the HP Vectra turned off, install the Olicom 3137 16/4 Token-Ring PCI adapter into a PCI slot. 2 Connect network cable media to the Olicom 3137 16/4 Token-Ring PCI card. 3 From the location of the "NetWare Client for DOS and Windows v1.21" installation files, execute "Install.exe". 4 Select option 5 "Select the driver for your network board" and press "Enter". 5 Select "OTHER DRIVERS"from the Network Board selection. 6 Insert the Olicom driver disk into the floppy drive. 7 Type the path "A:\DOS" when prompted and press "Enter". 8 Select "Olicom Token Ring PCI 16/4 Adapter" and hit "Enter". 9 Accept the default network board settings and press "F10" to save it.