HP Vectra VEi7 HP Vectra VEi7, Olicom OC-3137 Token Ring 16/4 PCI Adapter, Ins - Page 9

4 Installing the Olicom OC-3137 Token Ring 16/4 PCI Adapter Microsoft Windows 95 SR2.5 4 Installing the Olicom OC-3137 Token Ring 16/4 PCI Adapter Microsoft Windows 95 SR2.5 Connecting to a Novell NetWare 4.11 Server Requirements • HP Vectra with Windows 95 SR2.5. • Olicom 3137 Token Ring 16/4 PCI adapter and drivers disk version 29.4.0. • Driver: OCTOK16.SYS, version 4.16 • Microsoft Windows 95 SR2.5 media. • Novell NetWare 4.11 Server system that supports IPX network protocol. • Novell Client for Windows 95 v2.5 installation media. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 10 1000 Vectra VEi7 03 DCC0 Vectra VEi8 11 E400 Procedure 1 With the HP Vectra turned off, install the Olicom 3137 Token Ring 16/4 PCI card into a PCI slot. 2 Connect network cable media to the Olicom 3137 Token Ring 16/4 PCI card. 3 Power on the machine and boot to Windows 95. 4 When Windows 95 restarts, a message will appear to indicate that new hardware has been found. 5 Windows 95 will recognize a "Olicom 3137 Token Ring 16/4 PCI Adapter". 6 Specify your Computer name, Workgroup name, and Computer Description, and click on "Close". 7 When prompted, set the path to your Windows 95 files and click on "OK". 8 When prompted, click on "Yes" to reboot your machine. 9 From the location of the "Novell Client for Windows 95 v.2.5" installation files, execute "Setup.exe".