HP Vectra XE310 hp vectra xe310 series 1, technical reference manual - Page 13
Architectural View, Main Memory
View all HP Vectra XE310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Architectural View The following diagram shows the XE310 Intel i810E Step B Chip architecture: System Features Display Processor Celeron or Pentium III System Memory System Bus (66/133MHz) GMCH Intel 82810e 64bit (66/100MHz) 266 MB/s ATA33/66 for example LAN CS4299 PCI 33 ICH Intel 82801AA HDD and CDD Super LPC Bus I/O PS/2 KB and MS Serial and // AUDIO AC97 USB FWH INTEL 82802AB(4M) USB #1 USB #2 Main Memory There are two 168-pin DIMM slots on the system board for installing main memory. You can install 133MHz SDRAM modules, these are available in 64, 128 and 256MB memory modules. You can install a maximum of 512MB (2 x 256MB modules). You can only use non-ECC memory modules. 9
System Features
9
Architectural View
The following diagram shows the XE310 Intel i810E Step B Chip architecture:
Main Memory
There are two 168-pin DIMM slots on the system board for installing main memory. You can install
133MHz SDRAM modules, these are available in 64, 128 and 256MB memory modules. You can install a
maximum of 512MB (2 x 256MB modules).
You can only use non-ECC memory modules.
GMCH
Intel
82810e
ICH
Intel
82801AA
HDD and CDD
FWH
CS4299
Super
I/O
System Memory
System Bus
(66/133MHz)
64bit
(66/100MHz)
Display
USB
ATA33/66
LPC Bus
PCI 33
INTEL 82802AB(4M)
266 MB/s
AUDIO AC97
Processor
Celeron or Pentium III
PS/2 KB and MS
Serial and //
for example LAN
USB #1
USB #2