HP Vectra XE310 hp vectra xe310 series 1, technical reference manual - Page 21
Network
![]() |
View all HP Vectra XE310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
System Features Network HP 10/100 BT PCI Ethernet Adapter HP 10/100 BT PCI Ethernet Adapter Features LAN Interface • 32 bits PCI 10/100 BT • RJ 45 LAN port Power Management • RWU for ACPI Windows 98, Windows 98 SE, Windows 2000, Windows XP • On Now 1.0; APM 1.2; ACPI 1.0 • PCI 2.2 Manageability • DMI 2.0 Component Code • WfM 2.0 • PXE 2.0 BootROM Diagnostics • Production Diag • MAC address DOS report tool Drivers Windows 95, Windows 98, Windows 2000, Windows NT 4.0, MS-DOS, Novell, Windows PX (embedded) Specifications Network Interface • 10 Mbps Ethernet 10BASE-T: Ethernet IEEE 802.3 industry standard for a 10 Mbps baseband CSMA/CD local area network. • 100 Mbps Ethernet 100BASE-TX: Ethernet IEEE 802.3u industry standard for a 100 Mbps baseband CSMA/CD local area network. Physical Dimensions • Height: 5.3 cm (2.11 in.) • Length: 12 cm (4.72 in.) Boot on LAN The HP XE310 PC can boot on LAN. However, this feature is disabled by default in the BIOS Setup program. For more information, refer to "Using the HP Setup Program" on page 20. LAN connector The 10/100BT connector is located on the rear of the HP XE310 PC. LEDs 10/100BT LAN connector For more information on network technology, refer to the Technical Reference Manual - Business PC Technology. 17
![](/manual_guide/products/hewlettpackard-vectra-xe310-hp-vectra-xe310-series-1-technical-reference-manual-11f2c9b/21.png)