HP Vectra XE320 hp vectra xe320, upgrade guide - Page 20
Reconnect the power cord., PC, ensuring that it is firmly and correctly in place.
View all HP Vectra XE320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Upgrading and Replacing PC Hardware 7 Slide the new drive into the drive tray. 8 Replace the three screws. 9 Reconnect the cables at the back of the floppy drive and hard drive and replace the drive tray in the PC, ensuring that it is firmly and correctly in place. 10 Replace the PC's side panel (refer to "Removing and Replacing the Side Panel" on page 12). 11 Reconnect the power cord. 20
Upgrading and Replacing PC Hardware
20
7
Slide the new drive into the drive tray.
8
Replace the three screws.
9
Reconnect the cables at the back of the floppy drive and hard drive and replace the drive tray in the
PC, ensuring that it is firmly and correctly in place.
10
Replace the PC’s side panel (refer to “Removing and Replacing the Side Panel” on page 12).
11
Reconnect the power cord.