HP Workstation xw4100 Adaptec SCSI RAID 2120S: Software User's Guide - Page 24
Enable when protected, Enable always, Disable
View all HP Workstation xw4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Adaptec SCSI RAID 2120S/2200S Software User's Guide 4 Select the desired stripe size. The allowable stripe sizes are 16, 32, and 64 KB (the default). For RAID 50 arrays, 64 KB is the only stripe size supported by ACU. The default stripe size gives the best overall performance in most network environments. 5 Specify whether you want to enable read caching for the array. This option should always be enabled to optimize performance, unless your application is doing completely random reads, which is unlikely. 6 Specify if you want to enable write caching for the array. Note: By design, some controllers do not allow the use of write caching. In such cases, the controller will not activate write caching, regardless of the write cache setting. If this is the case a message will be displayed that tells you the settings have been recorded but have no effect. Write caching options (if supported) consist of the following: ■ Enable when protected-If supported, enables the write cache only when a battery is present and the battery's charge status is OK. ■ Enable always-If supported, enables the write cache even if no battery is present or the battery's charge status is not OK. Note that setting an array's write cache property to Enable always might result in data loss or corruption if power to the controller is lost when no battery is present or the battery loses its charge. ■ Disable-Disables use of the write cache. 7 When you are finished, press Done. 2-8