HP Workstation xw4100 Adaptec SCSI RAID 2120S: Software User's Guide - Page 64
Controlling ARCPD for NetWare, Configuring the Notifier Service, System Event Log
View all HP Workstation xw4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Adaptec SCSI RAID 2120S/2200S Software User's Guide Controlling ARCPD for NetWare To stop the ARCPD using NetWare, type unload arcpd.nlm then unload notify.nlm. To restart the ARCPD, type load arcpd.nlm then load notify.nlm. Configuring the Notifier Service To configure the notifier service: 1 Place your cursor at a command prompt in the directory where Adaptec Storage Manager was installed. 2 Type any of the following commands: ■ For Windows: notify -c > Enter ■ For Unix/Linux: anotifyd -c > Enter ■ For Netware: load notify -c > Enter System Event Log The next step in configuring the notifier utility will ask you whether or not controller events should be added to the system event log. The default is set to log no events. To add controller events: 1 Choose Y (yes). 2 Select which level(s) of events you want to log. The list of events are found in Table 3-3. Each level of event can be enabled or disabled independently. For example, press 1 to enable logging of Critical events. Alternatively, to log both Critical and Warning, press 1 then 2. 3-32