HP XL Class 500/550MHz HP Visualize Linux Workstation - Owner's Guide: XL-Clas - Page 19

Connecting to a Network

Get HP XL Class 500/550MHz - Workstation PDF manuals and user guides View all HP XL Class 500/550MHz manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

Setting Up and Using Your HP Visualize Linux Workstation Connecting to a Network Connecting to a Network Your HP VISUALIZE Linux Workstation has a 10/100BT LAN interface adapter. The LAN adapter supports both 10 Mbit/s and 100 Mbit/s operations and automatically detects which network type is being used. 1. Connect the RJ-45 plug on your network cable to the LAN connector on the LAN Adapter. Push the plug into the connector until the plug clicks into place. The board shown here is a combined SCSI/LAN board. 2. Attach the other end of the LAN cable to a hub (or into a wall socket that is connected to a hub). Let your Network Administrator know that you are connecting your HP VISUALIZE Linux Workstation to the network. For further instructions on configuring your network connection, refer to the Upgrade and Configuration Guide available on HP's Web site. Chapter 1 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
Chapter 1
5
Setting Up and Using Your HP Visualize Linux Workstation
Connecting to a Network
Connecting to a Network
Your HP V
ISUALIZE
Linux Workstation has a 10/100BT LAN interface
adapter.
The LAN adapter supports both 10 Mbit/s and 100 Mbit/s operations and
automatically detects which network type is being used.
1.
Connect the RJ-45 plug on your network cable to the LAN connector
on the LAN Adapter. Push the plug into the connector until the plug
clicks into place.
2.
Attach the other end of the LAN cable to a hub (or into a wall socket
that is connected to a hub).
Let your Network Administrator know that you are connecting your
HP V
ISUALIZE
Linux Workstation to the network.
For further instructions on configuring your network connection,
refer to the Upgrade and Configuration Guide available on HP’s Web
site.
The board shown
here is a combined
SCSI/LAN board.