HP Xw6200 Sliding Rack Mount Kit Installation - Page 6
Installing on Threaded Hole Racks
 |
UPC - 882780333536
View all HP Xw6200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Sliding Rack Mount Kit Installation Installing on Threaded Hole Racks NOTE: This product must be mounted in the middle of a 4U space. Use the mounting aid at the end of this document to determine a 4U space and mark the center. 1. Remove the three pins from the rear slide mounting bracket using a flat blade screwdriver 1. 2. Remove the three pins and two nuts from the front slide mounting bracket 2. 3. Attach the rear slide mounting bracket to the rear rack column (screws provided by your rack manufacturer) 3. 4. Attach the front slide mounting bracket to the front rack column (screws provided by your rack manufacturer) 4. 3 1 A 4 2 Page 6 of 20
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
 |
 |
Sliding Rack Mount Kit Installation
Page 6 of 20
Installing on Threaded Hole Racks
NOTE: This product must be mounted in the middle of a 4U space. Use the mounting aid at the end of this
document to determine a 4U space and mark the center.
1.
Remove the three pins from the rear slide mounting bracket using a flat blade screwdriver
1
.
2.
Remove the three pins and two nuts from the front slide mounting bracket
2
.
3.
Attach the rear slide mounting bracket to the rear rack column (screws provided by your rack
manufacturer)
3
.
4.
Attach the front slide mounting bracket to the front rack column (screws provided by your rack
manufacturer)
4
.
3
1
A
4
2