HP Xw6200 Sliding Rack Mount Kit Installation - Page 8
Mount into Rack, Mounting Aid
UPC - 882780333536
View all HP Xw6200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Sliding Rack Mount Kit Installation Mount into Rack 1. Insert the inner rails into the outer rails. 2. Push the workstation to slide it all the way into the rack. 3. Secure the workstation in the rack by tightening the thumb screws on the mounting flanges. Mounting Aid 1. Place the next page on the bottom of the rack (or on top of an already installed unit in a rack). 2. Align the circles with the rack holes to determine a 4U space. 3. The 4U space will be the top of the workstation after it is installed. 4. Mark the center at 2U. This will be the center line of the slides. Page 8 of 20
Sliding Rack Mount Kit Installation
Page 8 of 20
Mount into Rack
1.
Insert the inner rails into the outer rails.
2.
Push the workstation to slide it all the way into the rack.
3.
Secure the workstation in the rack by tightening the thumb screws on the mounting flanges.
Mounting Aid
1.
Place the next page on the bottom of the rack (or on top of an already installed unit in a rack).
2.
Align the circles with the rack holes to determine a 4U space.
3.
The 4U space will be the top of the workstation after it is installed.
4.
Mark the center at 2U. This will be the center line of the slides.