HP Xw6400 Second Xeon processor installation - Page 3
Step 4-Install the second processor - xeon
![]() |
UPC - 882780645493
View all HP Xw6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Second Xeon processor installation Step 4-Install the second processor After you have prepared the workstation for installation, perform the following steps to install the processor. Ä CAUTION: To prevent damage to this system, observe the following Electro Static Discharge (ESD) precautions while performing the system parts removal/replacement procedures: ❏ Work on a static-free mat. ❏ Wear a static strap to ensure that any accumulated electrostatic charge is discharged from your body to the ground. ❏ Create a common ground for the equipment you are working on by connecting the static-free mat, static strap and peripheral units to that piece of equipment. Ä CAUTION: Failure to follow the workstation preparation instructions and these installation steps could result in an improperly installed processor, causing extensive system damage. Ä CAUTION: Processor socket pins are delicate and bend easily. Use extreme care when placing the processor in the socket. ✎ NOTE: The second processor must be of the same speed, cache, size, and type as the primary processor. 1. Remove the processor socket protective cover. Figure 1 Remove socket protective cover 3/12
![](/manual_guide/products/hewlettpackard-xw8400-xeon-processor-installation-51d89b2/3.png)