HP Xw8200 Intel Integrated SATA RAID: Intel Application Accelerator User's Man - Page 31
Configuring BIOS for Intel, RAID for Serial ATA on Intel, Motherboards
![]() |
UPC - 882780210455
View all HP Xw8200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Configuring BIOS for Intel RAID for Serial ATA on Intel Motherboards R 11 Configuring BIOS for Intel RAID for Serial ATA on Intel Motherboards Note: The instructions listed below are specific to motherboards manufactured by Intel with a supported Intel chipset. Always follow the instructions that are provided with your motherboard. ** The specific BIOS settings on non-Intel manufactured motherboards may differ from the instructions listed below. ** The RAID option must be enabled in BIOS before the system can load the Intel Application Accelerator RAID option ROM code for Intel RAID. 1. Enter the BIOS Setup program by pressing the key after the Power-On-Self-Test (POST) memory test begins. 2. Select the Advanced menu, then the Drive Configuration menu. 3. Switch the Drive Mode option from Legacy to Enhanced. 4. Switch the RAID option to Enabled. 5. Press to save the BIOS settings and exit the BIOS Setup program. 11.1 Creating, Deleting, and Resetting RAID Sets Note: Please refer to Section 13 for illustration examples of the Intel Application Accelerator RAID option ROM windows. The Serial ATA RAID set must be configured in the RAID Configuration utility. During the Power-On Self Test (POST), the following message will appear for a few seconds: Press to enter Raid Configuration utility After the above message appears, press the and keys simultaneously. User's Manual 31
![](/manual_guide/products/hewlettpackard-xw8200-intel-integrated-sata-raid-intel-application-accelerator-users-manual-0c60d3a/31.png)