HP Xw8200 Intel Integrated SATA RAID: Intel Application Accelerator User's Man - Page 86
System Requirements, Serial ATA Data Cable
UPC - 882780210455
View all HP Xw8200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Serial ATA R C.3 C.4 System Requirements To use Serial ATA (SATA), your system must meet ALL of the following requirements: x SATA compatible logic either on the motherboard or on a Serial ATA adapter card x SATA compatible BIOS x SATA-aware device driver for the operating system x Generation 1-compatible SATA device such as a hard drive x A SATA data cable x A SATA power cable Serial ATA Data Cable Serial ATA (SATA) data cables are 7-pin cables. Either end of the SATA data cable can be connected to the SATA hard drive or the connector on the motherboard. SATA data cables can be up to 1 meter (39 inches) in length. The following illustration shows an example of a SATA data cable: 86 User's Manual
Serial ATA
R
C.3
System Requirements
To use Serial ATA (SATA), your system must meet ALL of the following requirements:
SATA compatible logic either on the motherboard or on a Serial ATA adapter card
SATA compatible BIOS
SATA-aware device driver for the operating system
Generation 1-compatible SATA device such as a hard drive
A SATA data cable
A SATA power cable
C.4
Serial ATA Data Cable
Serial ATA (SATA) data cables are 7-pin cables. Either end of the SATA data cable can be
connected to the SATA hard drive or the connector on the motherboard. SATA data cables can be
up to 1 meter (39 inches) in length. The following illustration shows an example of a SATA data
cable:
86
User's Manual