HP Xw8200 LSI 20320A-R PCI: Ultra 320 SCSI to PCI-X Host Adapters Users Guide - Page 19
Inserting the Host Adapter
![]() |
UPC - 882780210455
View all HP Xw8200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
2.1.2 Inserting the Host Adapter Perform the following steps to install your Ultra320 SCSI host adapter in the PC mainboard. Step 1. Remove the blank bracket panel on the back of the computer that is aligned with the PCI-X slot you have selected. Save the bracket screw. Step 2. Carefully insert the edge connector J1 of the host adapter into the PCI-X slot, as shown in Figure 2.2. Figure 2.2 Inserting the Host Adapter Bracket Screw 32-Bit Slots 64-Bit Slots Step 3. Make sure the edge connector is properly aligned before pressing the adapter into place. The bracket around connectors J2 and J3 should fit into the empty space where the blank bracket panel was removed. Installing your Ultra320 SCSI Host Adapter 2-3 Version 2.1 Copyright © 2002-2003 by LSI Logic Corporation. All rights reserved.
![](/manual_guide/products/hewlettpackard-xw8200-lsi-20320ar-pci-ultra-320-scsi-pcix-host-adapters-users-guide-7e619fc/19.png)