HP Xw8200 LSI 20320A-R PCI: Ultra 320 SCSI to PCI-X Host Adapters Users Guide - Page 23

Connecting Multiple Internal SCSI Devices

Get HP Xw8200 - Workstation - 1 GB RAM PDF manuals and user guides
UPC - 882780210455
View all HP Xw8200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

Step 2. Plug the 68-pin connector on the other end of the internal SCSI ribbon cable into the SCSI connector on the internal SCSI device. Figure 2.7 shows how to do this. Figure 2.7 Connecting Multiple Internal SCSI Devices Step 3. If you have another internal SCSI device, connect the internal SCSI ribbon cable to it. Figure 2.7 shows how to do this. You can connect other devices if the cable has more connectors. The Ultra320 SCSI host adapters support up to 15 SCSI devices connected to each SCSI channel. Step 4. Be sure that termination is enabled at the end of the cable that is farthest away from the SCSI host adapter. See Section 2.4, Connecting SCSI Devices 2-7 Version 2.1 Copyright © 2002-2003 by LSI Logic Corporation. All rights reserved.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
Connecting SCSI Devices
2-7
Version 2.1
Copyright © 2002-2003 by LSI Logic Corporation. All rights reserved.
Step 2.
Plug the 68-pin connector on the other end of the internal SCSI
ribbon cable into the SCSI connector on the internal SCSI
device.
Figure 2.7
shows how to do this.
Figure 2.7
Connecting Multiple Internal SCSI Devices
Step 3.
If you have another internal SCSI device, connect the internal
SCSI ribbon cable to it.
Figure 2.7
shows how to do this. You
can connect other devices if the cable has more connectors.
The Ultra320 SCSI host adapters support up to 15 SCSI
devices connected to each SCSI channel.
Step 4.
Be sure that termination is enabled at the end of the cable that
is farthest away from the SCSI host adapter. See
Section 2.4,