HP Xw9300 Rack Kit - HP Sliding Rack Mount Kit Installation - xw8200/9300 Work - Page 3

Install the Inner Rails and Flanges, Use a T-15 Torx driver and two M4 screws to attach the slide.

Get HP Xw9300 - Workstation - 1 GB RAM PDF manuals and user guides View all HP Xw9300 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 3 highlights

Install the Inner Rails and Flanges 1. Align the left mounting flange with the screw holes on the left side (bottom) of the chassis. L R 2. Use a T-15 Torx driver and two M4 screws to attach the flange. 3. Remove the inner slide members from each slide. 4. Align the inner slide with the two screw holes on the left side (bottom) of the chassis. 5. Use a T-15 Torx driver and two M4 screws to attach the slide. 6. Repeat this process for the right side (top) of the chassis. Be sure to attach the right mounting flange first, then the inner slide.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
Install the Inner Rails and Flanges
1.
Align the left mounting flange with the screw holes on the left side (bottom) of the chassis.
2.
Use a T-15 Torx driver and two M4 screws to attach the flange.
3.
Remove the inner slide members from each slide.
4.
Align the inner slide with the two screw holes on the left side (bottom) of the chassis.
5.
Use a T-15 Torx driver and two M4 screws to attach the slide.
6.
Repeat this process for the right side (top) of the chassis. Be sure to attach the right mounting flange
first, then the inner slide.
L
R