HP Z24q Maintenance and Service Guide - Page 19
DP connector DP1 DP2, Repair the DP connector
View all HP Z24q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
2) Use a hot air gun to melt the solder on the pins. 3) Lift the HDMI connector from the PCB. 4) Place the new component on the PCB. Be sure that it matches the PCB footprint. 5) Solder the new component. DP connector DP1 DP2 Repair the DP connector: 1) Use a soldering iron and a de-soldering pump to remove as much solder as possible from the pin. 2) Use a hot air gun to melt the solder on the pins. 16
16
2)
Use a hot air gun to melt the solder on the pins.
3)
Lift the HDMI connector from the PCB.
4)
Place the new component on the PCB. Be sure that it matches the PCB footprint.
5)
Solder the new component.
DP connector DP1 DP2
Repair the DP connector:
1)
Use a soldering iron and a de-soldering pump to remove as much solder as possible from the pin.
2)
Use a hot air gun to melt the solder on the pins.