HP Z600 HP xw and Z Series Workstations - HP SATA/SAS Hard Drive and Solid Sta - Page 1
HP Z600 - Workstation - 6 GB RAM Manual
UPC - 884962074053
View all HP Z600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
HP SATA/SAS hard drive and Solid State Drive installation This document describes how to install Serial ATA (SATA) and Serial Attached SCSI (SAS) hard drives or Solid State Drives (SSD) in the internal hard drive bay of HP Z or xw series Workstations. Throughout this document, all references to hard drives include solid state drives. Kit contents ● A SATA or SAS hard drive or Solid State Drive (SSD) ● Multiple SATA interface cables (each of a different length and with different connector orientation combinations) ● SAS-to-SATA interface adapter (included with SAS hard drives) ● Four 6-32 guide screws (for HP xw4000 Workstation series) ● SAS/SATA hard drive installation instructions (this document) ● Warranty information Tools required The following may be required to install the hard drive: ● T-15 Torx screwdriver or flat-bladed screwdriver Before you begin To view QuickSpecs and determine the compatibility of this product with your HP computer, see http://www.hp.com/go/productbulletin. Numerous installation scenarios exist for hard drives. This document describes hard drive installation in internal hard drive bays. ● If installing the hard drive in an optical bay converter, follow the instructions that shipped with the converter for the hardware installation. ● If connecting the hard drive to a Redundant Array of Independent Disks (RAID) controller, follow the instructions that shipped with the RAID controller. © 2006-2010 Hewlett-Packard Development Company, L.P. Microsoft, Windows, XP , and Windows Vista are U.S. registered trademarks of Microsoft Corporation. Printed in the U.S. ENWW Kit contents 1