HP dx2100 Computer Setup (F10) Utility Guide - Page 15
MPS Version Control for OS - ram
View all HP dx2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Computer Setup (F10) Utility Computer Setup (Continued) Heading Option Description Advanced BIOS Features (continued) HDD SMART Capability Boot Up NumLock Status Disables/enables SMART capability. Allows you to set the default NumLock status to off or on. Security Option Allows you to set the security option to Setup or System so that the password is required every time the system boots or only when entering Computer Setup. Hyper-Threading Technology Disables/enables hyper-threading (only available for operating systems that are optimized for hyper-threading technology). APIC Mode Disables/enables the APIC mode. MPS Version Control for OS Allows you to set the MPS table version to: • 1.1 • 1.4 OS Select for DRAM > 64MB Allows you to select Non-OS2 or OS2. Select OS2 only if running an OS2 operating system with greater than 64MB of RAM on the system. BIOS Write Protection Disables/enables BIOS upgrading. ✎ Support for specific Computer Setup options may vary depending on the hardware configuration. 10 www.hp.com Computer Setup (F10) Utility Guide