HP dx2100 Computer Setup (F10) Utility Guide - Page 19
The default is Disabled. Select Enabled
View all HP dx2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Computer Setup (F10) Utility Computer Setup (Continued) Heading Option Description Power Management Setup (continued) Resume by PME Wake on device S5 Resume by Alarm Date (of Month) Alarm Disables/enables Resume by PME. Disables/enables wake device from network. Disables/enables RTC alarm. If Resume by Alarm is enabled, allows you to select the day of the month for resumption of RTC alarm. Time (hh:mm:ss) Alarm If Resume by Alarm is enabled, allows you to select what time the RTC alarm will resume. PnP/PCI Reset Configuration Data Configurations Disables/enables automatic reconfiguration. The default is Disabled. Select Enabled to reset Extended System Configuration Data (ESCD) when you exit Setup, if you have installed a new add-on and the system reconfiguration has caused such a serious conflict that the OS cannot boot. Resources Controlled By Allows you to select whether resources are controlled automatically or manually: • Auto (ESCD-Extended Storage Configuration Data) • Manual BIOS can automatically configure all the bootable and Plug-and-Play-compatible devices. If you choose Auto, you cannot select IRQ, DMA and memory base address fields since BIOS automatically assigns them. ✎ Support for specific Computer Setup options may vary depending on the hardware configuration. 14 www.hp.com Computer Setup (F10) Utility Guide