HP dx2718 service reference guide: HP Compaq dx2710 MT/dx2718 MT/dx2710 SFF Bu - Page 13
Computer Setup
View all HP dx2718 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Setup Utilities and Diagnostics Features Computer Setup (Continued) Heading Option Description Standard CMOS Features (continued) SATA Port 0 SATA Port 1 SATA Port 2 SATA Port 3 For each, allows you to: • IDE Channel 0 Master (for SATA Port 0 Only) • IDE Channel 1 Slave (for SATA Port 1 Only) • detect HDD size and head on selected channel • set extended drive on selected channel to (for SATA Port 2 and port 3 only): • None • Auto • set access mode on selected channel to: • CHS • LBA • Large • Auto • view: • Capacity • Cylinder • Head • Precomp • Landing Zone • Sector Legacy Mode Support (for SATA 0/1 ONLY) Disable Enable Halt On Allows you to set at: • All Errors • No Errors • All but Keyboard • All but Diskette • All but Disk/Key Advanced F11 Prompt BIOS Features Quick Power On Self Test Allow you to enable or disable this feature. Disables/enables the system to skip certain tests while booting. Enabling this feature decreases the time required to boot the system. POST Delay Time (seconds) Allows you to set a POST delay time to: • 0 Sec • 5 Sec • 10 Sec • 15 Sec • 20 Sec ✎ Support for specific Computer Setup options may vary depending on the hardware configuration. Service Reference Guide 483941-001 2-5