HP dx2718 service reference guide: HP Compaq dx2710 MT/dx2718 MT/dx2710 SFF Bu - Page 79
POST Error Messages, Default Settings, Save and Exit, Screen Message, Probable Cause
View all HP dx2718 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
POST Error Messages POST Error Messages Screen Message Probable Cause Keyboard error or no keyboard present Cannot initialize the keyboard. Memory Test: Memory test fail Override enabled Defaults loaded This message displays during a full memory test, counting down the memory areas being tested. If POST detects an error during memory testing, additional information appears giving specifics about the type and location of the memory error. If the system cannot boot using the current CMOS configuration, the BIOS can override the current configuration with a set of BIOS defaults designed for the most stable, minimal-performance system operations. Recommended Action Make sure the keyboard is attached correctly and no keys are pressed during POST. To purposely configure the system without a keyboard, set the error halt condition in Setup to HALT ON ALL, BUT KEYBOARD. The BIOS then ignores the missing keyboard during POST. No action request Reseat memory modules. Replace memory modules. Restart the computer, use the F10 Key to access Computer Setup. Select Load Default Settings > Save and Exit. C-2 483941-001 Service Reference Guide